Peerless PO13 Oilless Series Single Phase Air Compressor – Direct Drive – 1.5kW / 2.0HP – 12CFM/175LPM – Tank Mount

$1,354.55 Excl. GST $1,490.01 Incl. GST

In stock

This Peerless Oilless Tubie Air Compressor – 175LPM of free air delivery, this will run your framing guns through to your coil guns. Quick recovery is what this Air Compressor is designed for, don’t wait for the receiver to fill – the quick 5L recovery tank allows you to get on with the job without the Air Compressor cycling for a long period. Being an Oil Less Air Compressor it doesn’t matter about parking level too! compared to oiled Air Compressors. Drawing an impressive 6AMPS compared to 8AMPS on other models this is well suited for low voltage areas!.
$1,354.55 Excl. GST $1,490.01 Incl. GST

Please Note: Prices are indicative only and subject to change due to variations in supplier and shipping costs.

Fast Finance
From $6.18 Per Week

Description

Peerless oil-less range of air compressors are very reliable, cost-efficient and clean.
Copper wound electric motors with 7AMP draw producing an outstanding air flow of free air delivery along with its super quiet motor at only 52dBa +/-2.

This impressive Air Compressor produces 175LPM of free air delivery, this will run your framing guns through to your coil guns.

We have also fitted an electronic auto drain to the receiver on the standard model (00590), as we all know its hard to remember to drain your tank. The 2HP motor / pump assembly is fully copper wound. This is where the weight comes into it, as the motor itself weighs 19kg. This is the easiest way to know if your oil less motor is an actual 2HP.

An over run cut out alarm is a new feature fitted to our PO13. This is to assist in making sure your air compressor doesn’t get damaged due to excessive running caused by air leaks or the air tool being too big for the unit. Protecting your investment and keeping it in top performance is our goal.

American Teflon barrels and piston rings deliver maximum performance and life span. These have to be serviced based upon hours of use. Being oil free doesn’t mean maintenance free – despite what any will tell you. On average they need to be replaced every 2000 Hours of use. Cheaper units are 500 hours of use dependent on material used in manufacturing process. We carry all spare parts and components to be able to service and maintain your air compressor. They are not a throw away air compressor, we believe in making sure your down time isn’t impacted, as down time is costly.

Being an Oil Less Air Compressor it doesn’t matter about parking level too! compared to oiled Air Compressors. Drawing an impressive 7AMPS compared to 9AMPS on other models this is well suited for low voltage areas!

Did you know?

In standard environment conditions when your air compressor reaches 14 PSI you have the reached the volume of air in the receiver!. So on this particular model (PO13) at 14 PSI you have 30L of compressed air in the tank. At 28 PSI you now have 60L of compressed air in the tank. So if the cut out pressure is 112 PSI, you now have 240L of stored compressed air! Who said small tanks don’t hold enough air?
As mentioned this can be affected by the temperature and other factors.
Smaller tanks also equates to quicker air recovery times of lost pressure along with lower operating temperature of pump.

Important

Please note: air compressors i.e piston type, are not designed to run continuously they must cut in and out. Direct drive models should only have up to a 40-50% duty cycle. Belt Drive hobby models are up to 60-70% and full industrial belt drive models are up to 75-85%. If the compressor runs over these duty cycles it could cause failure. Important – first check voltage on each building site as low voltage will cause the motor to fail on all compressors. It must have be better than 230 volt at peak times. Extension leads will cause voltage drop, it’s better to use extra air hose.

Specification
Code 00591
Model Tubie
Free Air Delivery (LPM) 175 LPM
Max PSI 145
Motor HP 2
Warranty pump 1 Year
Warranty motor 1 Year
Tank capacity (L) 5L
Pump uptime to 100PSI –
Cooling method Air cooled
Pump type Oil-less Copper wound
Cylinders 2
Pump head tension 7.8 FT LB11 NM
Oil capacity –
Pump RPM 1350
Outlet thread 1/4″ BSP
Electricity 240V / 10A
Amps draw 7
Dimensions
420 x 370 x 440 mm
Weight 29 kg

Frequently Asked Questions

Should I purchase industrial machinery from a tool shop or reseller, or from an industrial machinery specialist?

Tool shops and general resellers may offer a wide product range, but often lack the specialised knowledge to properly assess applications or provide ongoing technical support. An industrial machinery specialist ensures the right machine is selected and fully supported long after purchase. In most cases, buying directly from the importer or specialist also results in a lower purchase cost, as additional reseller margins are not added.

What after-sales support and warranty do you provide?

Industry leading after-sales support, Australia-wide. Backed by over 30 years of industry experience, more than two decades in business, and a long history of satisfied customers Australia-wide, Capital Machinery Sales provides after-sales support you can count on, long after your machine is delivered, backed by our dedicated support team.
  • Application support: Whether your requirements are straightforward or highly specific, we work with you to ensure your machine is set up and performing for your exact application, and we are here to help as your needs evolve.
  • Pre-dispatch testing: Every machine is fully checked and commissioned before it leaves us. It's a step that saves our customers countless issues down the track and sets your machine up for maximum uptime.
  • Warranty: We don't just pass on the manufacturer's warranty. We offer our own comprehensive warranty that goes further, giving you greater coverage and peace of mind, with extended warranty options also available.
  • Spare parts: Downtime costs you money, so minimising it is our priority. We keep a wide range of parts and consumables in stock, and if we don't have it on the shelf, we will track it down and get it to you as fast as possible.
  • Remote support: Fast help via phone, email, or live video, with no site visit needed in most cases. We pride ourselves on some of the fastest response times in the industry, because we know that when you need help, you need it now.
  • On-site service: Our engineers travel Australia-wide, with trusted contractors covering remote areas.
  • In-house repairs: Send your machine back to us for expert servicing and overhaul.
We’re in this together. Our shared goal is to keep your business running, and we are committed to delivering the best after‑sales service in the industry to make that happen. That’s why so many of our customers have been with us for years, and why they continue to return. Need service, application advice, or want to discuss a support plan? Contact our team and we will take care of it.

How quickly will I receive my machine?

Often, we can ship the same day if required, depending on stock availability, the time your order is placed and the available shipping options.

Specification

Additional information

Weight 39 kg
Dimensions 52 × 47 × 54 cm
Compressor Type

,

Dryer Configuration

Pump Motor

Motor size

Compressor Type (Air End)

Air Quality / Lubrication

Mount Type

CFM

LPM

Kilowatt (kW)

Horse Power (HP)

Voltage Supply Type

Power Source

Reviews (0)

Only logged in customers who have purchased this product may leave a review.

Reviews

There are no reviews yet.

Our Clients

Lantrak
Crane Aid
Denkat Truck Bodies
Tait Motors
South Burnett Engineering
Case VIC
1800 706 620

Your Items

✕
Loading…