Peerless PD12 Single Phase Air Compressor – Direct Drive – 1.5kW / 2.5HP – 12CFM/175LPM – Tank Mount
The Peerless PD12 Direct Drive Single Phase Air Compressor – 175LPM 10AMP is a great little unit delivering 175 liters of free air per minute, capable of running your framing and coil guns, it’s one of the largest direct drives on the market. Fitted with a water trap filter regulator along with auto drain function (not manual drain like most) its ready to be set at 90PSI to run your air tools.
Check CFM Conversions:
Peerless PD12 Single Phase Air Compressor - Direct Drive - 1.5kW / 2.5HP - 12CFM/175LPM - Tank Mount
Peerless PD12 Single Phase Air Compressor - Direct Drive - 1.5kW / 2.5HP - 12CFM/175LPM - Tank Mount
Description
The PD12 is a great little unit delivering 175 litres of free air per minute, capable of running your framing and coil guns, it’s one of the largest direct drives on the market.
Fitted with a water trap filter regulator along with auto drain function (not manual drain like most) its ready to be set at 90PSI to run your air tools
This unit has also been designed that if you have the wheels removed you can mount directly to a base without having to chock up either ends.
Able to run;
- Low pressure spray guns
- Car tyre inflation
- Stapling / fitting gun
- Framing nail gun
- Grease gun
- Chalking gun
- Riveter gun
Did you know?
In standard environment conditions when your air compressor reaches 14 PSI you have the reached the volume of air in the receiver!. So on this particular model (PO13) at 14 PSI you have 30L of compressed air in the tank. At 28 PSI you now have 60L of compressed air in the tank. So if the cut out pressure is 112 PSI, you now have 240L of stored compressed air! Who said small tanks don’t hold enough air?
As mentioned this can be affected by the temperature and other factors.
Smaller tanks also equates to quicker air recovery times of lost pressure along with lower operating temperature of pump.
Important
Please note: air compressors i.e piston type, are not designed to run continuously they must cut in and out. Direct drive models should only have up to a 40-50% duty cycle. Belt Drive hobby models are up to 60-70% and full industrial belt drive models are up to 75-85%. If the compressor runs over these duty cycles it could cause failure. Important – first check voltage on each building site as low voltage will cause the motor to fail on all compressors. It must have be better than 230 volt at peak times. Extension leads will cause voltage drop, it’s better to use extra air hose.
Performance of all our belt driven air compressors are to AS4637.
For over 60 years Peerless Products has been delivering and exceeding the needs of industry. Ask us about your requirements.
Specification
| Code | 00085 |
| Model | PD12 |
| Free Air Delivery (LPM) | 175 LPM |
| Max PSI | 145 |
| Motor HP | 2.5 |
| Warranty Pump | 1 Year |
| Warranty Motor | 1 Year |
| Tank Capacity (L) | 40L |
| Pump up time to 100PSI | 1.55 – 2.00 Min |
| Cooling method | Air cooled |
| Pump type |
Alloy Direct Drive
|
| Cylinders | 1 |
| Pump head tension | 7.8 FT LB 11NM |
| Oil capacity | 650mL |
| Pump RPM | 2850 |
| Outlet thread | 1/4″ BSP |
| Electricity | 240V / 10A |
| Amps draw | 8 |
| Dimensions (mm) |
920 x 390 x 690 mm
|
| Weight (kg) | 39kg |
Frequently Asked Questions
Should I purchase industrial machinery from a tool shop or reseller, or from an industrial machinery specialist?
What after-sales support and warranty do you provide?
- Application support: Whether your requirements are straightforward or highly specific, we work with you to ensure your machine is set up and performing for your exact application, and we are here to help as your needs evolve.
- Pre-dispatch testing: Every machine is fully checked and commissioned before it leaves us. It's a step that saves our customers countless issues down the track and sets your machine up for maximum uptime.
- Warranty: We don't just pass on the manufacturer's warranty. We offer our own comprehensive warranty that goes further, giving you greater coverage and peace of mind, with extended warranty options also available.
- Spare parts: Downtime costs you money, so minimising it is our priority. We keep a wide range of parts and consumables in stock, and if we don't have it on the shelf, we will track it down and get it to you as fast as possible.
- Remote support: Fast help via phone, email, or live video, with no site visit needed in most cases. We pride ourselves on some of the fastest response times in the industry, because we know that when you need help, you need it now.
- On-site service: Our engineers travel Australia-wide, with trusted contractors covering remote areas.
- In-house repairs: Send your machine back to us for expert servicing and overhaul.
How quickly will I receive my machine?
Specification
Additional information
| Weight | 49 kg |
|---|---|
| Dimensions | 102 × 46 × 79 cm |
| Dryer Configuration | |
| Pump Motor | |
| Motor size | |
| Compressor Type (Air End) | |
| Air Quality / Lubrication | |
| Mount Type | |
| CFM | |
| LPM | |
| Kilowatt (kW) | |
| Horse Power (HP) | |
| Voltage Supply Type | |
| Power Source | |
| Compressor Type |














Reviews
There are no reviews yet.